Hot Racing Traxxas Spartan/M41 Aluminum Battery Water Cooler

This is a Hot Racing Traxxas Aluminum Spartan and M41 Battery Cooler Set, intended for use with Traxxas Spartan and M41 Catamaran boats and as an optional set up to keep battery temps down. This kit provides a constant heatsink to help reduce battery temperatures due to high loads. Cool water is circulated through the sealed channeled plate via a venturi pick-up at the stern of the boat. The warmed water is then discharged via the included water outlet.

• Heat energy constantly sinked away from batteries via cool circulating water
• Large plates to cover large batteries
• CNC machined aluminum alloy for reduced weight and increased heat transfer
• Factory RTV silicone permanent seal
• Dual water pickup for optimal cooling
• CNC machined, blue anodized, hose clamps and dual water outlet
• Stainless steel hardware
• Compatible with almost all batteries

Plate size: 147x49x6.6mm

Total kit weight: 162g

• (2) cooling plates with nipples
• (2) aluminum tubing clamps
• (1) aluminum water outlet
• (2) stainless steel water pick-ups
• Hardware
• Tubing (trim as needed)

• Requires drilling four holes in stern of boat. Two to route water inlet tubes. Two for the tubing clamp screws. 
• Requires drilling two holes in hull of boat to accommodate dual water outlet
• Aluminum Hot Racing HRASPN28WL06 cooling hose ferrules are not included in this kit and may be purchased separately